New Hyde 110 Jib / Schaefer Snapfurl 500 / inside leads


Below: This furler uses an external halyard so you have to be careful to prevent the halyard from wrapping on the fuler as its rotating. This setup has been trouble free so far..

Below: The two inch extension below the furler is for a set up pinning stick link here    Raising the furler by two inches results in needing to move the lead track position back about 2 inches.

Below: In my opinion (which could be wrong), the 110 works well with "inside" track but its also about the largest jib you an go with using the inside track position.